Note that this selection will show all currencies in the shop the same. You cannot select different currencies for separate products.
This main structure of the tower is made of 4.5mm anodized aluminium that has been laser cut and machine bent.
IMPORTANT NOTE ON LEAD TIMES: The towers have a lead time of 2-4 weeks before shipping. This is mainly due to the fabrication time for some of the components. If your order is timed with a batch in process, it can be quicker.
This main structure of the tower is made of 4.5mm anodized aluminium that has been laser cut and machine bent. The plates are bolted together as can be seen in the images with aluminium spacers and using M8 stainless steel hex bolts.
The structure is fitted to the motorbike head tube using a front bracket that is held in place with a rear-mounted u-bolt and a mounting block that fits on your ignition key mount.
The plates have been cut to allow for different screen height variation as well as different lights and different sizes. The top plate also has various pre-cut holes for mounting buttons, powerpo0ints or lights.
Side panels and the front screen is fixed using D-Zus D-ring fasteners.
The tower was designed with vibration and crumple zones in mind. If the tower takes a direct hit from the front, it is designed to flex and bend at the neck. The thinking behind this is that the force must not pass through to the motorbike frame, head tube of the bike body. The tower, if bent or broken must be able to be fixed on a route or event.
Vibration is also a concern and a lot of thinking and design has been put into curbing the stresses that constant vibration brings.
The various panels of the tower are replaceable and available as separate components.